Best 18 Drip Tubings

 

5 Pack (50 total pieces) Orbit Drip Irrigation 1/2″ Tubing Strap with Nail – 10 pack - With a tightening nail ready to apply, this drip tubing strap works on wood, masonry and stucco surfaces for a variety of drip irrigation tube placing needs. This orbit tubing clamp holds drip irrigation tubing tightly in place. Features and benefitsworks with all brands of ½-inch sprinkler drip linemade of durable uv-resistant plastic for long-lasting performancehas a tightening nail ready for immediate applicationworks on stucco, masonry and wood surfaces. This drip tube clamp is made of uv-resistant plastic that will not crack or fade from the sun, ensuring many years of dependable dripper irrigation use.

 

Koram Drip Irrigation 1/4" Blank Distribution Tubing Drip Watering Hose 50′ Roll - Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and uv damage. Textured finish improves handling making connections faster and easier. Rugged and flexible tubing, easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas. Compatible with most brands of barbed fittings, spot watering emitters, bubblers, misters and sprays. Use to branch off from 1/2″ tubing to run water to 1/4″ emitter tubing or emitter devices.

 

Rain Bird XFS0618500 500′ Coil of XFS Drip Tubing (.6 GPH, 18″ Spacing) - Low-profile emitters reduce the in-line pressure loss, allowing longer lateral runs. Dual-layered, copper over black, for unmatched resistance to chemicals, algae growth, and uv damage. Copper shield technology that protects the emitter from root intrusion without requiring epa-approved handling procedures. Most flexible dripline tubing in the industry.

 

Orbit 67758 Drip Tubing Cutter & Punch Tool Kit - The orbit 67758 drip tubing cutter and punch tool kit is ideal for any drip installation. Both tools come with a comfortable ergonomic grip and a stay sharp, heat treated blade. Drip tubing cutter and punch tool kit. .

 

Dig B38100 1/4" Vinyl Micro Drip Tubing, 100′, Brown - Use with 1/4 in barbed fittings. The polyethylene micro tubing exhibits outstanding environmental stress-cracking resistance and burst strength. Available in 50′, 100′, and 500 foot coils. Meets the demand of micro irrigation systems for above or below the ground layouts in agricultural, landscape, and residential gardening installations. Contains a minimum of 2% concentrated carbon black resin antioxidant to protect the drip tubing from thermal degradation.

 

Rain Bird TS2510PS Drip Irrigation 1/4″ Tubing Stake with Bug Cap Diffuser and Locking Cap, 10-Pack - Accepts 1/4” tubing from 0. Rain bird “the intelligent use of water”. Used to stake 1/4″ drip tubing at desired locations or secure spot watering emitters. From the manufacturer rain bird’s ts2510pk tubing stakes are used to hold 1/4” drip irrigation distribution tubing securely in place at the root zone. 256 outside diameter. Rain bird ts25/10pk drip irrigation 1/4″ tubing stakes, 10-pack. Convenient re-sealable zip lock plastic bag contains 10 stakes. Includes attached diffuser “bug-cap” remove from stake and feed onto end of 1/4” tubing to prevent insects and debris from clogging the opening. 19 to 0. Rigid design constructed of durable u-v resistant plastic materials with locking cap.

 

Rain Bird T22-250s Drip Irrigation 1/4" Blank Distribution Tubing, 250′ Roll, Black - Use to branch off from 1/2″ tubing to run water to 1/4″ emitter tubing or emitter devices. Compatible with most brands of barbed fittings, spot watering emitters, bubblers, misters and sprays. Textured finish improves handling making connections faster and easier. Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and uv damage. Rugged and flexible tubing, easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas.

 

Rain Bird Be50/4pk Drip Irrigation 1/2" Universal Barbed Elbow Fitting, Fits All 1/2" – 5/8" Tubing, 4-pack - 0-50 psi pressure rating. Pack of 4 “l” shaped connectors. Connector for use with 1/2″ drip irrigation tubing. Barbed ends grab tubing for a secure leak-proof connection. Allows creation of a custom layout for your planting area.

 

DIG 16-035R Drip Irrigation Tubing Hole Punch - The deluxe pro punch stainless steel pins can be replaced. Constructed of uv resistant, high impact plastic. Easy grip handle constructed of durable plastic and non-corrosive materials. Use to puncture holes when installing drip emitters and micro sprinklers in polyethylene tubing. Designed to remove the residual debris formed as the hole is created in the drip tubing.

 

2 Pack – Orbit Drip System End Cap for 1/2 inch Drip Tubing - 690,. With a drip-lock feature, this drip tube fitting works with most common sizes of ½-inch drip irrigation line (. 710). 700,. It easily attaches and removes for simple installation and maintenance. Whether you are making repairs to your dripper system or customizing a dripping irrigation system, this drip tube fitting is great. Features and benefitsworks with most common sizes of ½-inch irrigation drip tubing including 5/8-inch raindrip®, toro® blue stripe and ½-inch orbit® and mister landscaperend cap is ideal for removing for winterization of drip sprinkler systems as well as drip tubing flushingdrip-lock release tab makes for easy installation and maintenance. This drip-lock end cap is used to close the ends of ½-inch sprinkler drip line.

 

Rain Bird Ssf70-50s Drip Irrigation 1/2" Sub-surface Emitter Tubing With Copper Shield Technology, 50′ Roll - Ideal for organic gardens, turf grass, shrub and ground cover areas. The perfect above or below ground drip system for turf and non-turf applications. Irrigates plants directly at their roots for 90% watering efficiency. Patented copper shield technology protects emitters from root intrusion. Industry leading flexibility allows tighter turns with fewer elbows for fast and easy installation.

 

2 Pack (20 total pieces) Orbit 1/4″ Drip Barbed End Plug for Drip Irrigation Tubing – 10 pack - These barbed end plug fittings are easy to install with large finger tabs. These barbed end plugs are ideal for do-it-yourself dripper irrigation projects as well as for professional drip watering use. This pack of 10 drip tube barbed end plugs is designed for use with 1/4-inch irrigation drip tubing as well as to plug small holes in 1/2-inch sprinkler drip line. Features and benefitscomes in a pack of 10 end plug fittingsworks with all brands of ¼-inch irrigation drip lineplugs small holes in ½-inch drip irrigation tubinglarge finger tabs allow for simple installationdurable plastic construction ensures many years of dependable drip system irrigation. These drip tube fittings are durably constructed of high-impact plastic to guarantee many years of dependable micro irrigation.

 

Rain Bird Bc50/4pk Drip Irrigation Barbed Coupling Fitting, Fits All 1/2" – 5/8" Tubing, 4-pack - Pack of 4 couplings. Allows creation of a custom layout for your planting area. 0-50 psi pressure rating. Connector for use with 1/2″ drip irrigation tubing. Barbed ends grab tubing for a secure leak-proof connection.

 

Toro 53640 Blue Stripe Drip 1/4-inch Tubing Sprinkler With Emitters, 100-feet - Dimensions = 250 od x 170 id. Use as a drip hose to irrigate containers, gardens and flower beds. 1/2 gallon per hour (gph) emitters every 6-inch.

 

Mister Landscaper MLT-71 Poly Drip Tubing, 1/2″ - Made in the usa. This 50-ft roll of tubing can be found in the mister landscaper micro sprinkler landscape & shrub kit, micro sprinkler starter kit, micro sprinkler add-on kit, and the vegetable garden drip kit. Can be left on top of mulch or buried. Flexible and strong enough to withstand line freezes.

 

Freehawk® Watering Equipment / Automatic Irrigation Equipment, 1/4″ Blank Distribution Tubing Irrigation Gardener’s Greenhouse Cooling Suite Plant Watering Drip Kit Accessories - It is so easy that if you can attach a garden hose, you can install this system. Simple installation without digging or plumbing skills, to automate your system, add a timer (not include). Simplify insertion and removal of small barbed fittings and dripers. This kit has everything you need to get started with drip irrigation and stop watering your plants by hand. Precise drip watering for green, healthy plant growth with low water usage.

 

Rain Bird Et256-50s Drip Irrigation 1/4" Emitter Tubing, 6" Spacing, 50′ Roll, Brown - Built in 1 gph (gallon-per-hour) emitters spaced 6″ apart. Waters evenly from beginning to end throughout the planting area. Attach to existing 1/2″ drip tubing with 1/4″ barbed fittings. Won’t clog and requires no maintenance. Works like soaker hose, only better.

 

Rain Bird FCKIT-1PK Drip Irrigation Faucet Connection Kit for 1/2″ Tubing, Includes Pressure Regulator and Filter - To automate your system, add a rain bird 1zehtmr hose-end timer (sold separately). Includes a backflow preventer, 25 psi regulator and a 150 mesh filter. Multi-function kit helps ensure proper operation of your drip irrigation system. Connects 1/2″ drip tubing to an outdoor faucet or garden hose. Constructed of uv-resistant durable abs materials.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.